# FISH Ball PlutoSDR Rev.A (Z7010-AD9361)
# Device Configuration File
#   1. Open with an Editor
#   2. Edit this file
#   3. Save this file on the device USB drive
#   4. Eject the device USB Drive
# Doc: https://wiki.analog.com/university/tools/pluto/users/customizing

[NETWORK]
hostname = fishball
ipaddr = 192.168.89.1
ipaddr_host = 192.168.2.10
netmask = 255.255.255.0

[WLAN]
ssid_wlan = 
pwd_wlan = 
ipaddr_wlan = 

[USB_ETHERNET]
ipaddr_eth = 192.168.2.10
netmask_eth = 255.255.255.0
gateway_eth = 

[SYSTEM]
xo_correction = 
udc_handle_suspend = 0
# USB Communication Device Class Compatibility Mode [rndis|ncm|ecm]
usb_ethernet_mode = ecm

[ACTIONS]
diagnostic_report = 0
dfu = 0
reset = 0
calibrate = 0

[TEZUKA]
callsign = NOCALL
locator = NOLOCATOR
lnb_power = off
refclk_source = internal
maxcpus = 2
attr_name = compatible
attr_val = ad9361
mode = 1r1t
audio_mode = off
rf_input = rx1
rf_output = tx1
serial_force = off
nfs_server = 
force_model = off
disable_usb_console = off
enable_ipv6 = no